Download Center
Version 10.1 by IwonaBudny on 2019/01/17 15:26
The primary way of downloading FEM-Design software is through StruSoft Installer. But If you are a customer with a license that is already setup in the StruSoft Installer, you can download the latest version of the program using the link below.
The service releases contain a lots of useful modifications, development and fixing, therefore it is highly recommended to install latest release.
FEM-Design 18
Latest version | FEM-Design 18.00.001 |
---|---|
Release date | January 17th, 2019 |
Download the latest full version of FEM-Design | ⭳ FEM-Design 18.00.001 |
Documentation | Release notes |
Download previous service version of FEM-Design 18 | - |
FEM-Design 17
Latest version | FEM-Design 17.01.004 |
---|---|
Release date | September 10th, 2018 |
Download the latest full version of FEM-Design | ⭳ FEM-Design 17.01.004 |
Documentation | Release notes |
Download previous service version of FEM-Design 17 | ⭳ FEM-Design 17.01.003 |
Comments
- Without a license, the program will work in DEMO mode.
- After latest version installation there is a probability to loss the results in some old models. In these cases user should perform the calculation again.
Download