The primary way of downloading FEM-Design software is through StruSoft Installer. But If you are a customer with a license that is already setup in the StruSoft Installer, you can download the latest version of the program using the link below.

The service releases contain a lots of useful modifications, development and fixing, therefore it is highly recommended to install latest release.

FEM-Design 18

Latest version

FEM-Design 18.00.004

Release dateJune 13th, 2019
Download the latest full version of FEM-Design⭳ FEM-Design 18.00.004
DocumentationRelease notes   |    What's new? 
Download previous service version of FEM-Design 18⭳ FEM-Design 18.00.003
Download the educational version of FEM-Design 18⭳ FEM-Design Educational 18.00.004


FEM-Design 17

Latest version

FEM-Design 17.01.005

Release dateFebruary 4th, 2019
Download the latest full version of FEM-Design⭳ FEM-Design 17.01.005
DocumentationRelease notes   |    What's new? 
Download previous service version of FEM-Design 17⭳ FEM-Design 17.01.004
Download the educational version of FEM-Design 17⭳ FEM-Design Educational 17.01.005 

Comments
  • Without a license, the program will work in DEMO mode.
  • After latest version installation there is a probability to loss the results in some old models. In these cases user should perform the calculation again.
Tags: download
Created by IwonaBudny on 2018/09/13 10:52
   
Copyright 2019 StruSoft AB
FEM-Design Wiki