This page contains list of changes, fixes and new features in FEM-Design 19 service versions.

Version 19.00.006

Released January 19th, 2021

Added:

  • EC2 9.8.5 (3) is implemented for bored piles from now.
  • Steel Joint normal force examination is implemented in the EN 1993-1-8  Table 7.20 based (I + RHS simplified joint) check.

Modified:

  • If profiled panel section is modified but panel width is the same, edge connections are not reset.

Fixed:

  • 1 layer gypsum thickness property has been read from the wrong field.
  • Auto design of timber bars for fire for Maximum of load groups caused crash.
  • Borehole final ground level input is checked more accurately.
  • Calculation of punching with one row of bent-down bars was not correct.
  • Cmz calculation in steel bars interaction calculation was inaccurate, if Mz was zero along the bar, although it did not affect the utilization result.
  • Copy to library command in Material dialog caused crash if it was called on a material type (Concrete, Steel, etc.)
  • Cross-section dimension lines were not correct in some special cases.
  • Delta beam rigidities were not involved into automatic buckling length calculation.
  • Eccentric bars of K brace steel joints  were not always displayed correctly in Manual design.
  • External reference symbol was wrong.
  • fdscript listing from batch: some could come up empty depending on their position.
  • Footfall results were not disabled in case of copying self/full excitation loads.
  • Image size in Documentation module was not set correctly in some cases.
  • In  very large models with a lot of load cases some of the linear load combination could be inaccurate.
  • In the list of bar deflection results, the Limit value column always showed the absolute limit (utilization was calculated with the correct value).
  • Influence line could crash in case of such selected point, where a point-point connection was attached to the end of a bar.
  • Listing of bar deflection result could list wrong  limit value in case the displacement was zero.
  • Loading palette settings didn't worked, when palette has been saved with 'Save with scale' mode.
  • Maximal bolt force was not calculated correctly for bolt groups  eccentrically loaded by shear force.
  • Object GUID was not modified when copying object from one instance of FEM-Design to an other instance.
  • Pasting a file into a model with different National annex may have caused crash if the models contained timber panels.
  • Problems  are solved at pasting file from different code, especially for Parametric model templates shipped with FEM-Design.
  • Program crashed in documentation module, if it contained Shell,EC1992-1-1, Annex F table for load combination that did not exist in the model.
  • Program crashed when entering documentation module if it contained labelled section resultant result but the model did not contain ant labelled section.
  • Program may have crashed at lateral torsional calculation of solid rectangular steel bar.
  • Radio buttons did not work correctly in Steel joint/Stiffness dialog.
  • RC shell autodesign did not invalidate punching results.
  • Scale to view option of results displayed in colour palette mode did not work at certain cases.
  • Selecting existing result point for dynamic detailed result failed.
  • Sometimes steel joint utilization result was not displayed in storey view mode.
  • Steel bar stability results may have been inaccurate if bar contained more buckling members.
  • Support stiffness was always meant in radian
  • Timber bar fire design auto beta n can be miscalculated.
  • Unit changing didn't worked for colour surface reaction results' numeric values.
  • Upon editing point/line foundation, soil was not refreshed automatically, only after the regeneration of the view.
  • Wind Load Macro - Zone F (and G) was not calculated correctly.

Version 19.00.005

Released September 28th, 2020

Added:

  • Import of Structural Analysis Format (SAF). It can be used for collaboration with Archicad 24 via the analytical member representation of the load-bearing model elements and their boundary conditions (supports, connections and links).
  • The Polish translation is now available at the documentation module.

Modified:

  • In case of constant loads, values are displayed in the middle of the object instead of at the end points/corners.

Fixed:

  • The calculated stiffness matrix of profiled panels was fixed. From now probably bigger stiffness will be calculated.
  • "Consider eccentricity caused by crack" option did not work correctly in case of multiply selection of plates/walls
  • After copying of profiled panels the physical extensions were disappearing.
  • Change between Load combination/Load groups calculation in design tool windows may have caused crash.
  • CLT: Södra's panels denoted with "L7s" from 210 to 280 had wrong layer orientation.
  • Connection results for max. of combinations were in the New result dialog, even if there was no connection in the model
  • Deleting a shell may have caused crash at Quantity estimation, if punching reinforcement had already been defined.
  • Editing fire protecting material library may have caused crash
  • Entering soil filling caused crash
  • Footfal analysis: in case of timber plates with panel type analytical model, the selected node of detailed result was not the closest to the selected point.
  • In case of steel cross-sections that are much wider than their height detailed result did not fit on page in documentation.
  • In case of very large plastic calculation files there was a memory allocation problem which causes "unknown" error and exit
  • In Plate module, if only load combinations were modified in an already calculated model, sometimes nonlinearity was not considered during the calculation
  • It was not possible to add steel bar shell model detailed results to documentation.
  • It was possible to create skew soil filling region
  • Maximum U, Ua, Us design result titles were not displayed correctly after saving and reloading a file.
  • Profiled wall height unit was incorrect
  • RC shell crack width result: in some special cases the tooltip and the numeric value did not display the same value.
  • Reloading Labelled section result may have crashed if new labelled section results were created.
  • Sigma z = 0.0 could cause crash in soil material dialog
  • Soil/Hydrostatic pressure surface load label was not refreshed when Multiply load command was applied on it.
  • Steel bar fire design calculation failed for load groups
  • Steel joint / Beta could be miscalculated using non-square truss in X/Y/T solution.
  • Steel Joint: Lambda_ov was not properly considered in the specific formula (EC 1993-1-8 7.5.2.1 (4) Table 7.10, Case of CHS/RHS chord and overlapped RHS braces joint with Lambda_ov is between 25% and 50%).
  • The sign of the line temperature loads were wrongly handled.
  • The struxml mesh_size attribute was not working correctly for walls.
  • Timber Bar / Fire design / Flexural buckling: Lambda could be calculated by the not burned-in section.
  • Timber bars imported from Revit via struxml may have had wrong safety factors.
  • Torsional auto design for RC bars could end up in 100%+ utilization.
  • Undoing automatic wind load generation may have caused crash at defining a new load.
  • Using modal layers dialog could cause crash at exit.
  • Utilization table of Numeric values function always showed zeros in case of individual load combination results.

Version 19.00.004

Released May 11th, 2020

Added:

  • StruXML import/export of labelled sections geometry.
  • StruXML import/export of surface objects' user defined local systems. It works for shells, panels, fictitious shells, surface support groups & surface connections.

Fixed:

  • Automatic local maximum values were positioned on original shape (instead of deformed) of shell in displacement result case.
  • Calculation time of labelled section resultants significantly decreased, progress bar added after scaling of analysis results.
  • Changing layer color could cause problems if there was an active function
  • Correction of bad default KdefU in timber materials StruXML import.
  • Default setting button didn't worked at Axis tool.
  • Dimensioning in analysis detailed result window was not correct.
  • Divider point tool ignored user defined ratio.
  • Export to DWG/DXF... command did not exported axes and  storeys.
  • If you changed data of storeys after an executed calculation and you undo them the next calculation could freeze.
  • Layer dialog did not save object layers configurations.
  • Load tab / Load Group dialog: New case button could wrongly modify the Seismic and Final construction stage cases in the already defined Load Groups.
  • Manual design of steel or timber bar design groups from Detailed result window caused crash.
  • Modifying material of a timber bar may have caused crash during the calculation.
  • Pasting bar reinforcement could cause crash.
  • Physical view was not correctly visualised at saving to docx.
  • Short commands modified by the user were not saved.
  • Solid option was not disabled in Displacement/Numeric value tool, if "Properties" was active.
  • There was memory leak in RC bar manual design.
  • Timber Bar Fire design / 2 layered A/F/H gypsum hp was considered with a smaller value than should be according to EC5 3.4.3.3.
  • When loading a *.pla file into 3D Structure module, dialog regarding division of curved walls popped up evenif the model did not contain curved wall.

Version 19.00.003

Released March 23th, 2020

Fixed:

  • Saving Layer status from Quick tools may have caused crash later, for example at launching the program. It is because of the "model.tlb" file which was created in a wrong folder, eg.  in a drawing folder. Those files from old versions will not be loaded.
  • Performing deflection check after design calculations may have caused crash in some cases.

Version 19.00.002

Released March 17th, 2020

Added:

  • From now the zero distances are allowed in Chamfer command.
  • When using Edit/Paste and Edit/Paste file... functions, global coordinate system can be easily defined as "insertion coordinate system" by pressing Enter or Ctrl+RB in the first or second definition step.

Modified:

  • CLT library, when adding new layer based on a timber library element, application data of the timber material is hidden now, as it has no effect on the CLT data.
  • Punching calculation has been changed in the Finnish NA.
  • RC Design / Punching / Studrail layout strategy was modified: more detailing rules are considered

Fixed:

  • CLT detailed result saving as docx in documention module caused crash.
  • Copy/paste of moving mass and footfall detailed results in documentation module may have caused crash at loading the file later.
  • Ctrl+A did not work perfectly at selecting design groups
  • Deleting path of moving load could have caused freezing.
  • Displacement results were printed in global coordinates instead of local coordinates at bar displacement tables for imperfection, stability, footfall and eigenfreq calculations.
  • Equivalent forces of PTC could be in wrong direction after the parent object was rotated.
  • Expired CLT panels (CLT 72, CLT 82, ..., CLT 178) are removed from timber panel library.
  • For some types of results (load case Sc, construction stage Sc, second order load combination, seismic) peak smoothing didn't work.
  • If bar section was modified by assigning Applied cross-section to it, its cross-section-based color schema was not refreshed.
  • If steel bar shell model utilization result was displayed on Steel design tab, then stability results were invalidated, program crashed when entering Steel design tab again.
  • Import of seismic loads' unique spectras via StruXML did not work correctly.
  • Importing large number of load cases via StruXML caused memory problem.
  • In Analysis / Detailed result, showing Max of Load Groups' combination information could cause crash.
  • In case of manual design and autodesign, Utilization table results were not refreshed when User switched between Max. of load combination and Max. of load groups mode.
  • In case of objects of External references pick line function was not applicable.
  • In some special cases punching calculation crashed.
  • In Wall and Plane Strain modules the local co-ordinate system of walls might be wrong if they are imported from 3D Structure module.
  • Investigate dialog disappeared after 1st fix.
  • No-shear regions were not generated automatically for shells which were not visible in Model 1 window.
  • Numeric values written on displacement results ocassionally were not correct, if predefined direction was set according to UCS.
  • Paste file crashed in some special cases
  • Paste file function could cause strand type losing in p.asted file contained PTC-s.
  • Pasting load cases from other file caused problem in load combinations if they contained seismic load cases.
  • Profiled panels' physical extent was not created correctly by StruXML import.
  • Program crashed during correct model function in case of merging region lines with different edge connection statuses.
  • Program crashed if documentation contained graphical windows with title longer than 40 characters and it was saved as template.
  • Punching / Autodesign required reinforcement quantity is more optimized.
  • Rc shell detailed result could crash in case of plates under pure tension.
  • Saving file as DWG or DXF from Section Editor caused crash.
  • Section results were not displayed when the file was loaded.
  • Some data were not saved as default in Settings dialog.
  • Some numerical problems were solved in PTC calculation.
  • Some steel joint was not displayed correctly in Manual design window.
  • Steel bar lateral torsional buckling calculation was not correct for mono-symmetrical I sections.
  • Steel bar shell model autodesign calculation caused crash in some special cases.
  • Steel joint, column base calculation could result wrong steel strains.
  • StruXML import can't set bar reinforcements' prescribed lengthenings
  • The calculation could freeze if post-tensioned cable and camber simulation by prestressing were used together.
  • The local co-ordinate system was not changeable for fictitious shells.
  • The unit was incorrect at reaction and connection line detailed results and tables: (kN->kN/m and kNm->kNm/m).
  • Timber panels were exported with default panel size only in StruXML.
  • Torsional-flexural buckling calculation in steel bar fire design was too conservative.
  • Utilization results of fire design calculations for load groups were not displayed by combinations.
  • When the shell internal force result file was larger than 2 GB, the read/write did not work properly.

Version 19.00.001

Released January, 2020

This is first release of FEM-Design 19. Check what's new in this version.

 

Created by StruSoft Developers on 2019/07/09 12:47
Copyright 2020 StruSoft AB
FEM-Design Wiki