Steel (Material)
Last modified by Fredrik Lagerström on 2020/04/03 11:30
Contents
General
For steel structures, the γ values (M0, M1 and M2) can be set.
Figure: Setting γ factors
Young modulus
Analysis type | Steel | |
Load cases, Load group, 1st order load combination | ULS | Ek |
SLS | ||
2nd order load combination, Imperfection calculation | ULS | |
SLS | ||
Stability analysis | ||
Eigenfrequency calculation Seismic analysis |
Table: Calculation of Young-moduli in different analysis types