Show last authors
1 {{box cssClass="floatinginfobox" title="**Contents**"}}
2 {{toc/}}
3 {{/box}}
4
5 FEM-Design //Section Editor// gives the possibility to define, edit and store profiles for the bar elements (beam, column and truss element).
6
7 The functions of the //Section Editor//:
8
9 * Drawing new sections
10 * Definition of new sections by parameters,
11 * Definition of complex sections by mixing drawing and standard profiles,
12 * Editing cross-sections,
13 * Calculation of sectional data
14 * Profile registration and organizing.
15
16 //Section Editor// can be started directly from design modules that work with bar elements from the Tools menu.
17
18 [[image:1584518862042-922.png]]
19 Figure: //Section Editor// as a built-in tool of design modules
20
21
22 Section Editor can be started as an independent FEM-Design application by clicking the [[image:1584518890573-420.png]] //Section Editor// icon in the “FEM-Design tools” folder of:
23
24 * Start > All Programs > FEM-Design…
25 * Windows Taskbar > FEM-Design System Tray [[image:1584518904696-586.png]] (if installed)
26 * Short-cut [[image:1584518922660-397.png]] on Desktop (if installed).
27
28 //Section Editor// module has only one tabmenu called [[image:1584518933702-615.png]] that contains all the section definition tools, but the FEM-Design drawing, editing, displaying etc. commands are also available on the //Section Editor //user-interface.
29
30 [[image:1584518875195-352.png]]
31 Figure: Section Editor user-interface
32
33 Sections are two-dimensional region elements defined in the Y-Z plane of the Global (and UCS) coordinate-system. Section Editor uses the Y-Z system for defining and calculating profiles, because the sections are perpendicular to the x’ axis (parallel with the y’-z’ plane) of the local coordinate system of bar elements.
34
35 = {{id name="Cross-Section Definition"/}}Cross-Section Definition =
36
37 New cross-section can be defined by drawing section regions with arbitrary geometry, or by giving parameter values of a parametric section available in the built-in Section library, or by combining the two methods to build complex sections.
38
39 == Drawing a Section ==
40
41 To draw a section use the [[image:1584518965487-114.png]] Draw section tool and apply [[image:1584518974769-373.png]] Define for the required region definition (geometry) mode [[image:1584519034341-461.png]] Rectangular, [[image:1584519042981-757.png]] Circular or [[image:1584519055394-896.png]] Polygonal.
42
43 [[image:1584519016081-732.png]]
44 Figure: Section defined as polygon
45
46 With [[image:1584519066253-361.png]] Pick lines tool, section can be generated by one-clicking drawing lines and arcs that define closed region. Drawing elements can be defined previously with the Draw menu commands or they can be imported from DWG/DXF files. With [[image:1584519092226-932.png]] Pick existing region tool, section can be generated by one clicking drawing region defined by the Region command of the Draw menu.
47
48 [[image:1584519104432-389.png]]
49 Figure: Section created by selecting closed contour
50
51 With the [[image:1584519354941-795.png]] Hole tool, openings and cuttings can be inserted to section regions with any shape defined
52 by the previously listed region definition modes.
53
54 [[image:1584519344478-786.png]]
55 Figure: Section edited by Hole
56
57 |[[image:light.png||alt="1582804930808-349.png"]]|You can read about the definition steps and functions of different region and hole geometries at the similar tools (“blue color-linked”) of Structure definition.
58
59 Section region shapes, corner points and side lines can be modified with the Modify menu tools.
60
61 == Parametric Section ==
62
63 Although, quick definition of parametric profiles available in the settings dialogs (Cross-sections) of Column, Beam and Truss member, parametric sections can be inserted for editing and using them to create complex sections.
64 Use [[image:1584519916753-325.png]] Insert section into drawing command to browse from parametric sections as well as standard and user-defined profiles, and to insert one or more of the required section with chosen geometry and sizes into the drawing area.
65
66 |(% style="width:116px" %)[[image:warning.png||alt="1582804849244-917.png"]]|(% style="width:1374px" %)Although, you may choose for example a timber profile for editing and register as another fabrication type (for example steel, concrete etc.), we suggest you to choose profile type that will suit for later design. But, always you decide the available design type of the section defined by Section Editor when registering it with its Fabrication technology into Section library.
67
68 == Definition steps ==
69
70 1. Choose a parametric section shape in Section library or select a predefined (standard or registered user-defined) profile from New >/Size… option.
71 [[image:1584519993257-429.png]]
72 Figure: Dialog for defining parametric sections or for choosing predefined sections
73 1. In case of parametric profiles, set the required geometric parameters. Each shape has a preview with the meaning of the parameters.
74 1. Set the insertion point at Insertion point tab, where the placement can be defined. Default setting for placement is the center of gravity, but it can be changed by clicking on the specific points (green points) or set by y’ and z’ coordinates.
75 1. Click OK to start inserting the defined or selected profile into the drawing area.
76 [[image:1584520004880-235.png]]
77 Figure: Definition of insertion point position
78 1. Place the section with its insertion point on the drawing area. Click [[image:1584520019980-386.png]] or [[image:1584520040773-740.png]] to insert the section in the origin of the global Y-Z system.
79 1. Further rotation can be set with the direction of the section’s z axis. Accurate angle can be typed in the Command line or click [[image:1584520028169-489.png]] or [[image:1584520037747-686.png]] to use the direction set in the Reference point… dialog.
80
81 == Complex Section ==
82
83 |(% style="width:116px" %)[[image:warning.png||alt="1582804849244-917.png"]]|(% style="width:1374px" %)(((
84 Only homogenic complex profiles can be defined in the Section Editor, because one material can be assigned to it later in the design modules when defining beams, columns and bars.
85
86 At complex sections, intersecting or overlapping among section regions are not allowed. If there is any problem, the program stops the sectional data calculation with an error message.
87 )))
88
89 As read in the previous chapter, quick definition of complex profile can be done by the repetition of section insertion with different positions and directions.
90
91 [[image:1584520076081-903.png]]
92 Figure: Complex profile built by parametric profiles
93
94 Of course, combining the section drawing and insertion modes various complex cross-sections can be defined.
95
96 [[image:1584520083243-307.png]]
97 Figure: Mixture of definition modes
98
99 = {{id name="Cross-Sectional Data"/}}Cross-Sectional Data =
100
101 Before calculating the data of the defined section, it is recommended to place the section’s centre of gravity to the global system origin. With the Query command of Tool menu, you can easily find the center of gravity point of the defined section region and insert a drawing point.
102
103 [[image:1584520133669-940.png]]
104 Figure: Section moved into Origin with its center of gravity
105
106 |[[image:light.png||alt="1582804930808-349.png"]]|Query finds the center of gravity point of complex sections, if you merge the connected region parts with the Union tool of the Modify region command (Modify menu).
107
108 [[image:1584520144672-595.png]]
109 Figure: One complex region after merging region parts
110
111 The following settings (Settings menu) effect on sectional data calculation:
112
113 [[image:1584520153039-247.png]]
114 Figure: Calculation settings
115
116 * **Display result**
117 Set data types you want to display after calculation in the Sectional data window. The data list contains all available data on which multiply-selection such as [[image:1584520208456-539.png]] and [[image:1584520217909-402.png]]. (See the meanings of the sectional data at Sections.) All data can be selected by the Select all button.
118 * **Calculation options**
119 The Link the touching regions automatically at the next calculation option handles the connected regions as one complex region in calculations. The option influences the value of the following parameters: perimeter (P), area/perimeter (A/P), shearing center (Ys, Zs), shearing factors (Rho y, Rho z, Rho yz, Rho 1, Rho 2), torsion moment of inertia (It), torsion section modulus (Wt), warping parameter (Igamma) and Wagner parameters (z1, z2, z gamma).
120
121 To calculate the sectional data set at Monitored data click [[image:1584520248447-124.png]] Calculate on the [[image:1584520255688-772.png]] tabmenu. The results are automatically displayed in the Sectional data window.
122
123 [[image:1584520238741-330.png]]
124 Figure: Calculated sectional data
125
126 If you make modifications on the section geometry, you have to rerun the sectional data calculation with [[image:1584520268414-405.png]] Calculate.
127
128 As a modeling feature, a calculated cross-sectional data can be manually modified/overwritten manually with arbitrary given value. With this possibility the user can create virtual cross-section with  known data. Double clicking on a data, custom value can be set for it in the Modify sectional data dialog. Modified data is signed with “:” instead of “=” in the Sectional data window. The original value can be reset for the current data with the dialog’s Calculate option, or you can reset all data with the Overwrite the user modified sectional data at the next calculation option (Settings > Calculation options).
129
130 [[image:1584520279354-953.png]]
131 Figure: Customizable sectional data
132
133 = {{id name="Documentation of Cross-Section"/}}Documentation of Cross-Section =
134
135 With the [[image:1584520307001-248.png]] Insert report command, the table of the calculated sectional data can be placed on the drawing area based on the Display result setting.
136
137 [[image:1584520313525-348.png]]
138 Figure: Sectional data inserted to drawing area
139
140 If you make modifications on the section geometry, you have to rerun the sectional data calculation with [[image:1584520334041-858.png]] Calculate and the content of the table refreshes automatically.
141
142 The table is stored on the Sectional data object layer. The color of the table can be modified together with the layer’s color. More display changes such as the modification of the text and border style can be done with the Properties > Change properties tool (Edit menu).
143
144 The defined section is lying on the Cross-section object layer, so the default blue color of section regions can be modified together with the layer’s color.
145
146 = {{id name="Insert section into library – Section Library"/}}Insert section into library – Section Library =
147
148 To add a new section having valid calculations to the Section library, click Register and set the required settings such as the name of the storing folder (Library name) and the Type and Size IDs. Also set the fabrication technology effect on the later available design calculations. To store the section press OK.
149
150 |(% style="width:116px" %)[[image:warning.png||alt="1582804849244-917.png"]]|(% style="width:1374px" %)(((
151 Before registering the current section click Calculate.
152 )))
153
154 [[image:1584520384369-999.png]]
155 Figure: New section registered to Section library
156
157 (% border="1" style="width:390px" %)
158 |(% style="background-color:#005a9b; width:153px" %)(% style="color:#ffffff" %)**Fabrication technology**|(% style="background-color:#005a9b; width:153px" %)(% style="color:#ffffff" %)**Design**
159 |(% style="width:234px" %)Rolled steel|(% style="width:153px" %)Steel bar design
160 |(% style="width:234px" %)Cold-formed steel|(% style="width:153px" %)Steel bar design
161 |(% style="width:234px" %)Weld steel|(% style="width:153px" %)Steel bar design
162 |(% style="width:234px" %)Concrete|(% style="width:153px" %)RC bar design
163 |(% style="width:234px" %)Timber|(% style="width:153px" %)Timber bar design
164 |(% style="width:234px" %)Generic|(% style="width:153px" %)- (only for analysis)
165
166 Table: Fabrication technology and the assigned design type
167
168 The program automatically detects the shape type of the sections and shows it as a symbol. It is important for the later design calculations.
169
170 The content of the Section library can be edited (renaming, deleting etc.) with the Edit library command.
171
172 [[image:1584520437880-240.png]]
173 Figure: Library and content editing
174
175 A registered section can be added to beam and column elements by choosing it in the Section tabpage of the element settings dialog (Default settings).
176
177 [[image:1584520447638-276.png]]
178 Figure: User-defined section used for bar elements (beams)
Copyright 2020 StruSoft AB
FEM-Design Wiki