<
From version < 5.1 >
edited by Hamid Richard Allili
on 2019/11/25 12:09
To version < 5.2 >
edited by Hamid Richard Allili
on 2019/11/25 12:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -19,8 +19,27 @@
19 19  
20 20  [[image:1574679210030-270.png]][[image:1574679223883-632.png]]
21 21  
22 +On the General tab the //Eccentricity// on General tab is also modified (improved). So far it was only a display option, without any effect on the calculation. This limitation has no real technical obstacles, thus it will be the choice of the User with a new checkbox here.
22 22  
24 +On the Material tab of properties dialog, we can set the mechanical model of the plate. The original orthotropic shell model is supplemented with two new types, so User can select from the following options:
23 23  
26 +1. Orthotropic shell
27 +1. Cross laminated timber
28 +1. General laminated composite
29 +
30 +
31 +For the sake of uniformity, //Display stiffness// is available for all three kind of mechanical models. This matrix is calculated to the middle surface of the element (independently on the eccentricity of the General tab), it should be noted in the tooltip of this button.
32 +
33 +[[image:1574680093243-258.png]]
34 +
35 +Independently on the selected type, the //General//, //Border// and //Panel// tabs are the same for all the three options, only the Material tab changes according to the selection.
36 +
37 +== Orthotropic shell ==
38 +
39 +Within this feature, there is not change on the Material tab of orthotropic timber shell (picture taken after the separation of creep factors and library displaying change to tree view item)
40 +
41 +
42 +
24 24  ----
25 25  
26 26  (% style="text-align: justify;" %)
Copyright 2020 StruSoft AB
FEM-Design Wiki