From version < 45.1 >
edited by Hamid Richard Allili
on 2019/11/29 15:15
To version < 46.1 >
edited by Hamid Richard Allili
on 2019/11/29 15:15
Change comment: There is no comment for this version



Page properties
... ... @@ -83,6 +83,10 @@
83 83  
84 84  [[image:1574697194599-496.png]]
85 85  
86 +The detailed result the following options are available:
87 +
88 +[[image:1575036940703-167.png||height="475" width="910"]]
89 +
86 86  It is only available for maximum type results, the maximum criteria are the same as for the point based detailed result, except one significant difference: in this case the searching is not limited to a node, the program checks all node on the shell according to the selected criteria. For the first criteria group (All components maximum) the five stress component maximums may arise at five different nodes on the shell (also possibly from five different combinations), this result is excellent to see the overall maximum stresses on the shell considering simultaneously all nodes and all combinations. These nodes are displayed with position and node number on the geometry figure. In case of the second (All layer maximum by stress type) and third (Layer maximum by stress type) maximum criteria group the search focuses on one stress component, thus all stress figures display the result of the same node that provides the maximum for the selected component with simultaneous stress figures at this node for the other components. In the display options the scale/size of the figures and display/font of the values can be specified.
87 87  
88 88  == Deflection check ==
Copyright 2020 StruSoft AB
FEM-Design Wiki