Icon: 1584703700385-304.png

The step of a reference line (straight or arc) definition by selecting a previously defined line:

Select lines or region (drawing or structural object) edges define the requested shape of the reference line with one of the selection modes.

1584703730394-657.png

Figure: An example for defining Wall by selecting all lines

1584703738417-292.png

Figure: Defining Beams and Walls on Plate edges (1.) and Line supports on Wall edges (2.)

warning.pngFor Columns in FEM-Design 3D Modules, only vertical lines or edges can be selected.

1584703789832-946.png

Figure: Column definitions by selecting vertical lines/edges

Copyright 2020 StruSoft AB
FEM-Design Wiki