<
From version < 20.3 >
edited by IwonaBudny
on 2018/09/06 15:16
To version < 20.4 >
edited by IwonaBudny
on 2018/09/06 15:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -289,7 +289,10 @@
289 289  [[image:1536239563646-414.png||height="169" width="264"]]
290 290  
291 291  (% style="text-align: justify;" %)
292 -In the static calculations, load cases which contain seismic forces behave like the other normal static forces. Consequently they can be inserted in load combinations and load groups. If they are inserted in the load combinations then they can take part in the imperfection and stability analysis. Of course there is no possibility to convert the masses from these load cases. As it can be seen in the table above, this effect can be taken into account by positive or negative sign as well, because the seismic effect means vibration between +/- extreme values, but the results are shown only in positive direction for the sake of simplicity. As it is shown above all the seismic possible cases can be found in the list but only those cases are valid which were calculated in seismic calculation. The calculated static loads from seismic effect can be found among the seismic results in the Equivalent loads.
292 +In the static calculations, load cases which contain seismic forces behave like the other normal static forces. Consequently they can be inserted in load combinations and load groups. If they are inserted in the load combinations then they can take part in the imperfection and stability analysis. Of course there is no possibility to convert the masses from these load cases. As it can be seen in the table above, this effect can be taken into account by positive or negative sign as well, because the seismic effect means vibration between +/- extreme values, but the results are shown only in positive direction for the sake of simplicity.
293 +
294 +(% style="text-align: justify;" %)
295 +As it is shown above all the seismic possible cases can be found in the list but only those cases are valid which were calculated in seismic calculation. The calculated static loads from seismic effect can be found among the seismic results in the Equivalent loads.
293 293  )))
294 294  
295 295  == Final results of seismic effect (Seismic max.) in load combination ==
Copyright 2020 StruSoft AB
FEM-Design Wiki